
Add to Cart
Cold Water Soluble Film | |||||||||
Product Type: | APFN | ||||||||
Discription: | Cast film, Embossed, translucent. | ||||||||
Application: | Packaging Film for Pesticide, Agricultural Chemicals | ||||||||
Thickness: | 50microns | ||||||||
Width: | 450mm ~ 650mm | ||||||||
Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. | |||||||||
The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. | |||||||||
Water content of PVA film: 10~12% | |||||||||
Weight per SQM(density at 1.22 g/cc) for 35 microns | 60 g/sqm | ||||||||
Performance | |||||||||
Tensile Strength (GB/T 1040.3-2006) | M.D. | 45MPa | |||||||
T.D. | 35MPa | ||||||||
Elongation (GB/T 1040.3-2006) | M.D. | 180% | |||||||
T.D. | 260% | ||||||||
Solubility | |||||||||
Water Temperature | Dispersion (sec.) | Dissolution (sec.) | |||||||
25℃ Unrest water | 35 | 80 | |||||||
Testing method: Both side of film contacts water with stirring by megnetic stirrer. | |||||||||
Packaging: Rolls wrap individually with inner laminated foil and PE film, | |||||||||
protective out reinforce paper carton. | |||||||||
Storage Conditions: Dry, no direct solar radiation, no high temperatures, not frozen. | |||||||||
Film should remain original outer package until time of use. |